J Series - Submersible Ejector Pumps

  • J Series - Submersible Ejector Pumps

●  Special Mix Chamber design – Provides maximum air suction and produces the maximum amount of small air bubbles, which increases the rate of oxygen supply.

●  High Efficiency Sewage Impeller design – Suitable for most all sewage environments.The Jet pump is equipped with strainer which prevent solids to block water flow.

●  Submersible aerator design – The Jet pump runs very quietly while submerged in the water and you can also install the silencer on the air suction pipe to decrease any noise levels. The Jet pump design can save the cost of construction of a silencer room which is required with a surface blower.

●  One set of ejector is equipped with one piece of expansion pipe. Expansion pipe is made of PVC which provide good resistance to corrosion.

●  Simple Construction – Easy to install and operate, with no need to install complex piping. It can be used with our GRS (guide rail system) for ease of installation and maintenance.



50Hz

Item Description
Limits
of Use
Liquid Temp. 0~40°C(32~104°F)
Applications Waste Water • Sewage • Industrial Waste Water
Type Frequency 50Hz
Motor 2P (3000rpm) / 4P(1500rpm) • Dry Motor
Insulation Class B(1HP) •
Class F(2~5HP) • Class H(7.5~10HP)
Protection IP68
Protector Auto-cut
Bearing Ball type
M.seal Double M.seals
Impeller Vortex • Open • Channel
Material Upper Cover FC200
Motor Frame SUS304 • FC200(JP)
Shaft SUS410(1HP) • SUS403(2~5HP)• SUS420J2(7.5~10HP)
M.seal CA/CE & SiC/SiC
Casing FC200
Impeller FC200
Cable VCT or H07RN-F or SJOW/SOW
Aerator Air Inlet Chamber FC200
Nozzle SUS304
Diffuser PVC(1~5HP) • SS400(7.5~10HP)
Optional Pumps can be customized to fit specifications

60Hz

Item Description
Limits
of Use
Liquid Temp. 0~40°C(32~104°F)
Applications Waste Water • Sewage • Industrial Waste Water
Type Frequency 60Hz
Motor 2P (3600rpm) / 4P(1800rpm) • Dry Motor
Insulation Class B(1HP) •
Class F(2~5HP) • Class H(7.5~10HP)
Protection IP68
Protector Auto-cut
Bearing Ball type
M.seal Double M.seals
Impeller Vortex • Open • Channel
Material Upper Cover FC200
Motor Frame SUS304 • FC200(JP)
Shaft SUS410(1HP) • SUS403(2~5HP)• SUS420J2(7.5~10HP)
M.seal CA/CE & SiC/SiC
Casing FC200
Impeller FC200
Cable VCT or H07RN-F or SJOW/SOW
Aerator Air Inlet Chamber FC200
Nozzle SUS304
Diffuser PVC(1~5HP) • SS400(7.5~10HP)
Optional Pumps can be customized to fit specifications

●  Living wastewater, manholes, stock farms, wastewater treatment, supplies the oxygen to a slurry treatment tank.

●  To produce the water current in fountain pools or water tanks to help avoid accumulation and decay on the bottom of tank and pool.

●  Aquaculture farm, oxygen supply for water tank.

Technical Table of Contents (PDF)

✉ J 50Hz

✉ J 60Hz

✉ J 60Hz FEET

Catalog (PDF)

✉ J 50Hz
✉ J 60Hz

 Consent to the privacy policy before sending