● The internal casting is treated with High solids Epoxy coating, which can improve the anti-corrosion and extend the product lifetime.
● Standard design, incorporating a dry motor with thermal Auto-cut Protector that prevents the motor from over heating. Equipped with a cast iron motor frame for a faster heat dissipation. As well as an abrasion resistant mechanical seal and an additional oil seal.
● Water cooled motor to ensure a long life in continuous and intermittent operation, with high efficiency and energy savings.
● An exceptional High-lift and suction impeller design, which allows for dewatering of underground or circulating water applications.
● For above or below surface water applications; the IC pump strainer can be easily removed and replaced with a check valve, which allows for dewatering up to max. 8m deep of underground water and water circulation applications. (W–Well Type)
● New casing cover, with metric thread bolt hole that is easier for valve and adapter connection.
● The chrome steel impeller has been adopted for IC-32B~610, with hardness of HRC 25~30; better anti-corrosion, and extended product lifetime.
● High solids Epoxy coating prolong metals from corrosion and oxidization.
50Hz
Item | Description | |
---|---|---|
Limits of Use |
Liquid Temp. | 0~40°C (32~104°F) |
Applications |
Agriculture irrigation • Circulating water • Dewatering |
|
Type | Frequency | 50Hz |
Motor | 2P (3000rpm) • Dry Motor | |
Insulation | Class F (1.5~5HP) • Class H (7.5~10HP) | |
Protection | IP68 | |
Protector | Auto-cut | |
Bearing | Ball type | |
M.seal | Double M.seals | |
Impeller | Close | |
Material | Outer Cover | SUS304 |
Upper Cover | FC200 | |
Motor Frame | SUS304 (1.5HP) • FC200 (2~10HP) | |
Shaft | SUS403 (1.5~3HP) • SUS304 (5~10HP) | |
M.seal | CA/CE & SiC/SiC | |
Casing | FC200 | |
Impeller | BC (1.5HP) • Chrome Steel (2~10HP) | |
Cable | VCT or H07RN-F or SJOW/SOW | |
Optional | Pumps can be customized to fit specifications |
60Hz
Item | Description | |
---|---|---|
Limits of Use |
Liquid Temp. | 0~40°C (32~104°F) |
Applications |
Agriculture irrigation • Circulating water • Dewatering |
|
Type | Frequency | 60Hz |
Motor | 2P (3600rpm) • Dry Motor | |
Insulation | Class F (1.5~5HP) • Class H (7.5~10HP) | |
Protection | IP68 | |
Protector | Auto-cut | |
Bearing | Ball type | |
M.seal | Double M.seals | |
Impeller | Close | |
Material | Outer Cover | SUS304 |
Upper Cover | FC200 | |
Motor Frame | SUS304 (1.5HP) • FC200 (2~10HP) | |
Shaft | SUS403 (1.5~3HP) • SUS304 (5~10HP) | |
M.seal | CA/CE & SiC/SiC | |
Casing | FC200 | |
Impeller | BC (1.5HP) • Chrome Steel (2~10HP) | |
Cable | VCT or H07RN-F or SJOW/SOW | |
Optional | Pumps can be customized to fit specifications |